How long do hot water heaters last?
A tank heater holds water around the clock, so its steel tank is always fighting rust from the inside. A glass lining and a metal rod inside slow that down, but once the tank itself starts to leak, it cannot be repaired. That is why a tank has the shorter span.
A tankless heater has no tank to rust through. It heats water only as the water flows, and most of its parts can be replaced one at a time, which helps it last longer. Its weak spot is scale: minerals cling to the inside of its heat exchanger, and a unit that is never flushed can wear out well before its time.
What wears a water heater out early?
- Sediment. Minerals and grit settle at the bottom of a tank. On a gas heater, that layer sits between the burner and the water, so the bottom of the tank runs hotter and wears faster. You may hear it as popping or rumbling while the heater runs.
- Hard water. Water that carries more minerals leaves more sediment in a tank and more scale in a tankless unit.
- High water pressure. Pressure that runs too high strains the tank, the fittings and the relief valve every day. A plumber can measure it and tell you whether you need a regulator.
- A spent anode rod. Once the rod inside a tank is used up, the tank itself starts to rust. More on that below.
- Heavy use. A big household that runs hot water all day wears a heater faster than a quiet one does.
What is an anode rod?
An anode rod is a metal rod, usually magnesium or aluminum, that hangs down inside a tank water heater from the top. The water corrodes the rod instead of the steel tank, so the rod slowly wears away while the tank stays sound. It gives itself up so the tank can last.
When the rod is used up, nothing is left to protect the tank, and rust sets in. How fast that happens depends on your water. A plumber can check the rod and replace it if it is worn, a much smaller job than a new heater. It means shutting the heater down and draining some water, so leave it to the plumber. We do not have a Georgia range for replacing an anode rod, so ask for that price on its own line.
If your hot water smells like rotten eggs, the rod can be part of the reason. Some rod metals react with bacteria in certain water, and a plumber may suggest a different kind of rod. Tankless heaters usually have no anode rod.
How do you tell how old your water heater is?
The label on the side of a tank, or on the front of a tankless unit, lists the model and serial numbers and sometimes the date it was made. Many makers code the month and year into the serial number instead, often as letters and digits at the start. The maker's website or customer line, or any plumber, can read it for you.
Once you know the date, write it on the heater with a marker. The next time something goes wrong, you will know right away where the heater stands in its life.
What are the signs a water heater is near the end?
- Rusty or brown hot water while the cold water runs clear
- Water pooling around the base of the tank
- Popping, rumbling or banging while it heats
- Hot water that runs out sooner than it used to
- Rust or corrosion on the fittings at the top of the tank
- An age near or past the common range, with repairs coming more often
Water at the base is the sign to act on right away, since a small leak from the tank tends to grow. Close the cold water valve on the pipe that feeds the heater, switch off its breaker if it is electric, and call a plumber. If you cannot find that valve, or the leak is bigger, see how to shut off your main water valve.
What helps a water heater last longer?
- Have the tank flushed. Draining out the sediment on a schedule your plumber suggests keeps the bottom of the tank from baking under a layer of grit.
- Have the anode rod checked. A new rod put in before the old one is gone can add years to a tank.
- Keep the pressure in check. Ask a plumber to test your water pressure and look over the relief valve.
- Choose a moderate temperature setting. A very hot setting makes the heater work harder, wears it faster and raises the risk of scalds.
- Descale a tankless unit. Have it flushed as often as its maker advises, and more often if your water is hard.
What does a water heater cost in Georgia?
These are estimates from what Georgia plumbers publish, not quotes, and we do not name any company.
- Water heater repair: estimated at $300 to $400+. See what water heater repair costs.
- Tank water heater replacement: estimated at $1,850 to $2,150+. See what a tank water heater replacement costs.
- Tankless water heater installation: estimated at $3,100 to $4,450+. See what a tankless water heater installation costs.
If your heater is near the end and you are choosing what comes next, tank or tankless water heater compares the two.
Questions to ask your plumber
- How old is my water heater, and how does it look for its age?
- Can you check the anode rod while you are here?
- Is there sediment in the tank, and should it be flushed?
- Is my water pressure too high, and do I need a regulator?
- At this heater's age, is a repair worth making?
Ask the plumber to note the date and the work done on a tag at the heater, so the next visit starts with its history.
Prices mentioned here come from our Georgia plumbing cost ranges, built from the prices and cost guides Georgia plumbers publish on their public websites, collected September and October 2026.