R-410A and R-22 refrigerant: what your AC uses and why it matters

Most home air conditioners and heat pumps running today use R-410A refrigerant. Older systems may still use R-22, the refrigerant it replaced, and the newest ones use newer refrigerants. The data label on your outdoor unit tells you which one yours has, and it matters: R-22 is no longer made, so it costs more, and the two can never be mixed.

What does refrigerant do in an AC?

Refrigerant is the fluid that carries heat out of your house. It travels in a sealed loop of copper lines between the coil indoors and the outdoor unit. Indoors, it soaks up heat from the air blowing across the coil. Outdoors, the compressor squeezes it and the fan sends that heat into the yard, and then it heads back inside for more.

A heat pump runs the same loop in reverse in winter, gathering heat outdoors and bringing it inside. Each refrigerant does this job at its own pressures, which is why a system is built around one refrigerant and its label names it.

How can you tell which refrigerant your system uses?

Look for the data label on the outdoor unit, a metal plate or sticker usually found on a side panel. Beside the model and serial numbers, it names the refrigerant, such as R-410A or R-22, and often how much the system was charged with at the factory. You can read it from the outside, so there is nothing to open.

If that label is faded or missing, check the paperwork from the installation, or look for a label on the indoor unit, which may name the refrigerant too. A technician can also tell you at the next visit. Newer equipment names one of the newer refrigerants in the same spot.

What happened to R-22 refrigerant?

R-22, which many people call Freon, a brand name, was the standard refrigerant in home air conditioners for many years. It is no longer made in or imported into the United States, and the phaseout finished in 2020. What is left for repairs is refrigerant reclaimed from old systems or held in stock, so it costs more and can be harder to find.

An R-22 system can still be repaired and refilled from that shrinking supply. What changes is the price of the refrigerant, and it shows on the bill every time some is added.

What is R-410A, and is it being phased out too?

R-410A is the refrigerant that replaced R-22 in new home systems. It is now on its way out as well: it is being phased down, so new equipment ships with newer refrigerants instead. A working R-410A system can still be serviced and recharged, so its refrigerant alone is no reason to replace it.

The change shows up when you replace equipment. A new outdoor unit built for a newer refrigerant has to work with the indoor coil it is paired with, which can bring the coil into the job as well.

Can you mix R-22 and R-410A?

No. The two work at very different pressures and need different oils inside the system, so they cannot be mixed, and an R-22 system cannot simply be filled with R-410A. Parts made for one refrigerant are not built for the other.

Mixing refrigerants can make a system cool poorly, strain the compressor and leave the next technician guessing about what is inside. If a technician suggests putting anything other than the refrigerant on the label into your system, ask what it is and why, and get the answer in writing.

Does an AC use up refrigerant?

No. A system does not use refrigerant up, so a low charge means there is a leak somewhere in the loop. These signs can point to one:

A clogged air filter can cause some of the same signs, so check it first. If you see ice, switch the cooling off at the thermostat and let it thaw before a technician looks at it. Finding and fixing the leak is one job, and refilling the system afterward is another.

What does refrigerant work cost in Georgia?

These are estimates from what Georgia HVAC companies publish, not quotes, and we do not name any company. We have one Georgia range for a recharge, not one for each refrigerant, so ask which refrigerant a price assumes.

An older R-22 system that keeps losing refrigerant is the moment to price your other options too. Should you repair or replace your AC walks through that choice.

Questions to ask the technician

Ask for the refrigerant name and the amount added on every invoice, so the next technician knows what the system has had.

Prices mentioned here come from our Georgia HVAC cost ranges, built from the prices and cost guides Georgia HVAC companies publish on their public websites, collected September and October 2026.

Get an HVAC quote