How does each one make heat?
A furnace makes heat. A gas furnace burns natural gas or propane, an electric furnace runs current through heating elements, and either way a blower pushes the warm air through your ducts. In summer, a separate air conditioner does the cooling.
A heat pump moves heat instead of making it. It is built like an air conditioner that can run in reverse: in summer it carries heat out of the house, and in winter it gathers heat from the outdoor air, even cold air, and brings it inside. Because moving heat takes less energy than making it, a heat pump can warm a house on less electricity than heating elements would use.
As the weather turns colder, there is less heat outdoors to gather, and the heat pump has to work harder. That is where backup heat comes in, and it matters more in some parts of Georgia than in others.
Why compare whole systems?
A heat pump covers two jobs at once. Paired with an indoor air handler, it does all of your heating and all of your cooling. A furnace covers only the heating, so the fair comparison is a heat pump with its air handler against a furnace with an air conditioner.
The choice is wide open when both halves of your system are old. When a furnace fails beside a young air conditioner, replacing the furnace alone is usually the simpler path, and the bigger choice can wait until the AC is due.
Is a heat pump enough for a Georgia winter?
For much of the state, yes. Winters across most of Georgia are mild, with long stretches of cool days and only short cold snaps, which is the weather a heat pump handles best. It is a big reason heat pumps are so common across the South.
Cold snaps are where the difference shows. On the coldest nights, a heat pump leans on backup heat, usually electric heating elements in the air handler, and that backup costs more to run. In the north Georgia mountains, where winters run colder and longer, a furnace or a dual fuel system deserves a closer look. Ask your contractor how the heat pump on your quote handles your coldest weather.
Do you have gas at the house?
If natural gas is already piped to your home, a gas furnace is an easy option to keep, since the gas line, the meter and the vent are already in place. If your home is all electric, a heat pump avoids bringing gas in at all. Adding gas service where there is none is its own project with the gas utility, so ask what it would take before you count on it.
Rural homes sometimes run a furnace on propane from a tank on the property. Propane heats well, but you buy it by the delivery, so ask your supplier and your contractor to help you compare running costs. A gas or propane furnace also needs a sound vent to carry exhaust outside, so if you choose one, ask your contractor to check the vent and talk with you about carbon monoxide alarms.
How does the warm air feel?
This is a difference many people notice right away. A gas furnace sends out air that feels hot on your hand, in shorter bursts. A heat pump sends out air that is warm but not as hot, and it runs longer, steadier cycles to keep the house even.
Some people love the steady warmth of a heat pump, and some miss the blast of hot air from a furnace, especially standing near a vent on a cold morning. If you have lived with only one kind, ask friends who have the other, or ask the contractor how the system on your quote runs in winter.
What is dual fuel?
Dual fuel pairs a heat pump with a gas furnace instead of electric backup heat. The heat pump does the cooling and handles the mild winter days, and when it gets cold enough, the thermostat hands the heating over to the furnace. You get the heat pump's efficiency most of the time and the furnace's hot air on the coldest days.
It means owning both kinds of equipment, so it usually costs more to install than either one alone, and it needs gas at the house. It suits homes that already have gas and want a heat pump without giving up furnace heat on a cold snap. Ask your contractor when the system would switch over and how that is set.
What does each cost in Georgia?
These are estimates from what Georgia HVAC companies publish, not quotes, and we do not name any company.
- Heat pump installation: estimated at $7,700 to $9,500+. See what heat pump installation costs.
- Furnace replacement: estimated at $2,350 to $5,300+. See what furnace replacement costs.
- Full system replacement: estimated at $6,850 to $10,400+. See what a full system replacement costs.
The furnace range sits below the heat pump range, but a furnace only heats, so add the cooling side before you compare the two. When you are replacing everything, the full system range is the closer match, whichever way you go. Running costs depend on your gas and electric rates, which is why the questions below ask for an estimate built from your own bills.
Questions to ask your contractor
- Which setup would you choose for this house, and why?
- What backup heat does the heat pump use, and when does it come on?
- Based on my own utility bills, what would a year of heating and cooling cost with each setup?
- Are there rebates or tax credits for the equipment you are quoting, and where can I confirm them?
- What does the price include for the air handler, the coil, the thermostat and the vent?
Get both setups priced on the same visit, with the equipment for each listed by model, so you can line them up side by side.
Prices mentioned here come from our Georgia HVAC cost ranges, built from the prices and cost guides Georgia HVAC companies publish on their public websites, collected September and October 2026.