What does a home inspector look for?
Each inspector works from a checklist of their own, but most cover the same ground. Here is what is usually on it:
- Roof and gutters: missing, curled or damaged shingles, the flashing at chimneys and vents, and gutters and downspouts that carry water away. Depending on the roof's height and pitch, the inspector may walk it or look from a ladder, the ground or a drone.
- Structure and foundation: cracks in the foundation and the walls, floors or rooflines that sag, and signs that the house has settled or shifted.
- Attic: the insulation, the vents, the roof framing, and any stains that point to a leak.
- Electrical: the panel with its cover off, the breakers and wiring inside it, a sample of outlets and switches, GFCI outlets near water, and smoke alarms.
- Plumbing and water heater: the pipes in view, leaks under sinks, water pressure and drainage at the fixtures, and the water heater's age, venting and relief valve.
- Heating and cooling: whether the system runs and answers the thermostat, the age and condition of the equipment, and the filters and ducts in view.
- Windows and doors: whether they open, close and lock, fogged glass from failed seals, and signs of rot or water getting in.
- Crawl space or basement: moisture, standing water, wood rot, the supports under the floor and the vapor barrier on the ground.
- Drainage and grading: whether the ground slopes water away from the house, and where the downspouts empty.
- Built-in appliances: many inspectors run the dishwasher, the range and the disposal to see that they work, so ask whether yours does.
What does a home inspection leave out?
A standard inspection is visual, so anything behind walls, under floors or buried in the yard stays out of it. Radon, the sewer line, mold and pools are separate services, and our guide to which add-on inspections are worth it covers when each one makes sense.
A few other things often fall outside the report: whatever furniture, boxes or a locked door hide, systems that are switched off, and cosmetic wear like scuffed floors or tired paint. Termites and other wood-destroying insects are usually checked separately, often by a pest control company, so ask your agent whether you need that report too.
How long does a home inspection take?
For a typical single-family home, the inspection itself often takes two to three hours. A large or older house, a crawl space, outbuildings or add-on tests can stretch it, and a small condo can take less. Ask the inspector how long to plan for when you book, and when the report will arrive.
Should you be there for the inspection?
If you can, yes. Many inspectors welcome buyers for the whole visit, and they often save time at the end to walk you through what they found. Seeing a problem in person makes the report easier to understand later, and you can ask right then how serious it is.
Bring these along:
- The seller's disclosure, if you have it, so you can point the inspector to anything it mentions
- Your own list of worries, such as a stain you noticed or a door that sticks
- Your phone, for photos and notes
- Questions about the house itself: where the main water shutoff, the electrical panel and any gas shutoff are, and how to change the air filter
Ask your agent to make sure the utilities are on and that the attic, the crawl space and the electrical panel can be reached. The inspector cannot check what is blocked or switched off.
How do you read the inspection report?
Expect a long report with lots of photos, and do not let the length alarm you. Every house has a list, new ones included. It helps to sort the findings into groups:
- Safety issues: exposed wiring, a missing handrail, a gas smell or a water heater that is not venting properly. These come first.
- Big-ticket items: the roof, the foundation, the heating and cooling equipment, and water getting into the house. These are the findings that can change what the house is worth to you.
- Upkeep and small repairs: a loose railing, worn caulk, a dripping faucet. They are normal for any house and rarely a reason to walk away.
When the report says to have a specialist evaluate something, such as a roofer, an electrician or a structural engineer, take it seriously. It means the problem needs a closer look than a general inspection can give, and the specialist's visit is how you learn what fixing it will cost.
What happens after the inspection?
The report gives you something to act on. With your agent, you might ask the seller to make repairs, ask for a credit or a lower price, or decide the house is not for you. Ask your agent how long your contract gives you to inspect and negotiate, so the specialist visits fit inside that window.
If the seller agrees to repairs, ask for receipts, and think about a return visit from your inspector to check the work before closing.
What does a home inspection cost in Georgia?
These are estimates from what Georgia home inspectors publish, not quotes, and we do not name any company.
- Home inspection: estimated at $350 to $440+. See what moves a home inspection price.
- Radon testing: estimated at $180 to $250+. See what radon testing costs.
- Sewer scope inspection: estimated at $210 to $260+. See what a sewer scope inspection costs.
Mold inspection is priced on its own; see what a mold inspection costs. Ask for one written price that lists each service you book.
What should you ask before you book?
- What does your inspection cover, and what does it leave out?
- What training, license or certification do you have, and who issued it?
- Will you walk the roof, and will you go into the crawl space?
- Can I be there for the whole inspection?
- Can I see a sample report?
A sample report is worth asking for. It shows how the inspector writes things up, and the report is what you will lean on when you decide.
Prices mentioned here come from our Georgia home inspection cost ranges, built from the prices and cost guides Georgia home inspectors publish on their public websites, collected November 2026.