What does a breaker do when it trips?
Every circuit in your home starts at a breaker in the panel. The wire on that circuit can carry only so much current before it heats up, and the breaker is sized to match it. When the load passes that limit, or a fault sends a sudden rush of current, the breaker snaps off and the lights and outlets on that circuit go dead.
A tripped breaker usually sits between ON and OFF, or all the way at OFF, so it can be easy to miss. Look for the one handle that is not lined up with the rest.
What makes a breaker trip again and again?
Repeat trips usually come from one of these:
- Too much on one circuit. A space heater, a hair dryer and a vacuum on the same circuit can ask for more than it was built to carry. An overload usually trips after things have run for a while, not the moment you switch them on.
- A short circuit. A hot wire touching a neutral wire sends a rush of current, and the breaker trips at once, sometimes with a pop or a spark. A damaged cord, a failing appliance or a loose wire in a box can cause one.
- A ground fault. Current leaking toward the ground, through a ground wire, a metal box or water, trips a GFCI breaker or outlet, and a serious one can trip a standard breaker too. Wet outdoor outlets, a damp garage and aging appliances are common sources. See what a GFCI outlet does.
- An arc fault. An AFCI breaker trips when it senses sparking at a loose connection or in a frayed cord, the kind of problem that can start a fire.
- A worn-out breaker. Breakers wear with age and heat. An old one can trip under a normal load or stop holding at all, though it is rarely the first suspect.
What can you safely do yourself?
A few simple steps are safe for anyone, and none of them goes past the panel door:
- Unplug or switch off what is on that circuit, especially heaters, hair dryers and anything with a motor.
- Reset the breaker once: push the handle firmly to OFF, then back to ON.
- If it stays on, turn things back on one by one to find the culprit, or move a heavy user to an outlet on another circuit.
- If a GFCI outlet on that circuit has tripped too, press its RESET button.
Reset a breaker once, not over and over. Never hold it on, tape it in place or put in a larger breaker: the breaker is sized to protect the wire, and a bigger one lets that wire overheat. Leave the panel's cover on, too, since everything behind it is work for an electrician.
When should you stop and call an electrician?
Leave the breaker off and call an electrician if:
- It trips again right away, even with everything unplugged
- It will not reset, or the handle feels loose or mushy
- You smell burning or hot plastic near the panel or an outlet
- The panel, a breaker or an outlet feels warm to the touch
- You see scorch marks, melted plastic or sparks
- You hear buzzing or crackling from the panel
- Lights dim or flicker on the same circuit that keeps tripping
If you see smoke or flames, get everyone out and call the fire department. Most tripping problems are far calmer than that, and tracking down the cause is everyday work for an electrician.
What will an electrician do, and what does it cost in Georgia?
The visit usually starts with troubleshooting: testing the circuit, the breaker and what is plugged in to learn which cause you have. The fix depends on what turns up. A worn breaker gets replaced. A circuit that is simply asked to carry too much may need a dedicated circuit for the appliance that keeps tripping it. A short or a loose connection gets tracked down and repaired.
These are estimates from what Georgia electricians publish, not quotes, and we do not name any company.
- Troubleshooting: estimated at $150 to $190+. See what electrical troubleshooting costs.
- Circuit breaker replacement: estimated at $180 to $350+. See what circuit breaker replacement costs.
- Dedicated circuit: estimated at $490 to $600+. See what a dedicated circuit costs.
You will likely need only one of these fixes. Ask for the repair price before the work starts.
Questions to ask the electrician
- What caused the trips, and how did you confirm it?
- Would a dedicated circuit solve this, and what would it carry?
- Did you see any heat damage in the panel?
- Is anything else in the panel worth fixing while you are here?
Ask for the cause and the fix in writing, so you know what was found and what you paid for.
Prices mentioned here come from our Georgia electrician cost ranges, built from the prices and cost guides Georgia electricians publish on their public websites, collected September 2026.