How does a catalytic converter work?
Inside its metal shell is a honeycomb of tiny channels coated with precious metals: platinum, palladium and rhodium. As hot exhaust flows through, those metals help turn carbon monoxide into carbon dioxide, unburned fuel into carbon dioxide and water, and nitrogen oxides into nitrogen. The metals are not used up. They make the change happen and stay in place.
Those precious metals are why a converter costs a lot to replace, and why thieves sometimes cut converters off parked cars. A converter also works best once it is hot, which is why many cars place it close to the engine, and it stays hot after a drive, so avoid parking over dry grass or leaves.
Where is the catalytic converter?
It is part of the exhaust pipe under the car, and it looks like a wider section of the pipe between the engine and the muffler. Many cars have more than one. On some engines, it is built right into the exhaust manifold, the part that gathers the exhaust as it leaves the engine.
Oxygen sensors in front of the converter and behind it let the car's computer compare the exhaust going in with the exhaust coming out. If the converter is not cleaning it well enough, the computer notices and turns on the check engine light.
What are the signs of a failing catalytic converter?
These are the signs most often described:
- A rattle underneath. The honeycomb inside can break apart, and the loose pieces rattle, often most at startup.
- A rotten egg smell. A sulfur smell from the tailpipe can mean the converter is no longer handling the exhaust properly.
- Poor acceleration. A clogged converter chokes the exhaust, so the car can feel weak climbing a hill or merging onto the highway.
- Worse fuel mileage. An engine pushing against a blocked exhaust burns more fuel to do the same work.
- The check engine light. Often the first sign of all. See what a check engine light means.
A converter usually fails because of something else. Misfires that send unburned fuel into the exhaust, oil or coolant burning inside the engine, and a hard hit from road debris are common culprits, so the cause matters as much as the part.
How to clean a catalytic converter: does it work?
Converter cleaners are sold in auto parts stores, and some promise to clear deposits as you drive. No cleaner can repair a converter that has melted, cracked or broken apart inside, and none of them touches the engine problem that did the damage.
A converter that has failed, or one hurt by an engine problem, is usually replaced once the cause is fixed. Before you spend money on a cleaner or a new part, have a shop test the converter and find out why it is struggling.
What does a catalytic converter replacement cost?
We do not have a Georgia range for catalytic converter replacement on our auto repair cost webpage yet. The price depends heavily on the car, so ask for a quote that names the part, aftermarket or original, and the labor. Here is what pushes it up or down:
- The car. Replacing more than one converter, or one built into the exhaust manifold, takes more parts and more labor.
- Aftermarket or original. A converter from the carmaker, often called original equipment, usually costs more than one from another maker.
- Bolted or welded in. Some converters bolt in, others have to be cut out and a new one welded in, and rusted bolts add time either way.
- Fixing the cause. A misfire or an engine that burns oil has to be repaired first, or the new converter can fail the same way, and that repair is billed on its own. Oxygen sensors are sometimes replaced at the same visit.
What should you ask the shop?
- What test showed the converter has failed, and what damaged it?
- What will fixing that cause cost, on top of the converter?
- Is the converter in this quote aftermarket or original, and is it approved for my car where I live?
- Does the price include the labor, the gaskets and any oxygen sensors?
- Could the carmaker's emissions warranty still cover the converter, given my car's age and mileage?
- Does my county require an emissions test, and will the car pass one after this repair?
Get the part number, the part price and the labor on a written quote. That way you can line up shops on the same converter.